Deformable bi-component adhesive cement with improved adherence, extended snap time ( 20 minutes ) and reduced vertical slip, for bonding of light porous ceramic and stone material (as long as it is stable to humidity ), on interior and exterior walls, with dimensions up to 60 x 60 cm or equivalent.
COLOUR
White | Grey
PACKAGING
Bags of 25 Kg (paper)
6 Kg Jerri can
SURFACES
Cementitious based surfaces: plasters, aerated concrete, reinforced concrete, screed.
OBSERVATIONS
Consumption per ceramic area: S < 400 cm2: 3,5 kg/m2; 400 < S < 900 cm2: 4,5 a 5,5 kg/m2; S <900 cm2: superior to 6 kg/m2.
On light parts the use of Diera CL Compound White is recommended. On concrete surfaces, use an adhesion promoter (Aditek P) before bonding. Allows for overlay bonding (ceramic on ceramic ) on floors and walls. For ceramic parts with a surface area greater than 900 cm2, or in areas with intense traffic,carry out double bonding.
RESTRICTIONS
Do not apply when bonding pieces of dimensions exceeding 60x60x2 cm, over plates of plasterboard (Dierafix), on non-cementitious surfaces, in location subject to extreme temperatures, on sand paint surfaces.
When bonding special coatings, it is recommended to use Diera CL Ultraflex, and consulting Diera's Technical Department.
Technical Information