Single-component mixed cement glue, improved, with extended open time, reduced and deformable slip (C2TES1, according to NP EN 12004-1: 2017), with reduced dust emission.
Suitable for:
- Multi-support and multi-coating bonding on interiors and exteriors.
Indoor collages:
- Bonding ceramic tiles up to 120 x 60 cm, on screeds, plasters and concrete (Aditek P primer).
- Bonding ceramic tiles up to 60 x 60 cm indoors on plasterboard (Aditek P primer, non-waterproofed board).
- Bonding of ceramic sheets in interiors.
- Bonding ceramics and natural stones on radiant floors up to 60 x 60 cm.
- Bonding ceramics and natural stone (<1.5 cm thick) up to 60 x 60 cm indoors, on ceramic and plaster, on cement waterproofing membranes (Diera TC Cimflex / Diera TC Monoflex), on wood (Aditek P primer) , on composite cement plates and unpolished paintings.
- Bonding of glass and ceramic tiles in interiors on all the aforementioned substrates and on plasterboard (Aditek P primer, non-waterproofed board).
Collages on exteriors:
- Bonding ceramics and natural stone: granites, marbles and limestones, on facades (<6m) up to 45 x 45 cm and 1.5 cm thick.
- Bonding chafer or veneer on facades.
- Bonding ceramics and natural stone on exterior floors up to 60 x 30 cm, on screeds and on cementitious waterproofing.
Collages in swimming pools:
- Bonding of glass and ceramic tiles in swimming pools.
- Bonding ceramic tiles up to 60 x 30 cm in swimming pools.
COLOR
White | Grey.
PACKING
20 kg bags (paper and high density polyethylene, with valve, with time stamp and filling date).
SUPPORTS
Cement-based supports: screed, cement plaster and concrete.
Supports based on lime mortars and basting mortars.
Plaster-based supports (with Aditek P primer).
Plasterboard (with Aditek P primer if not water repellent).
Ceramic-based or natural stone supports, check their stability, if necessary remove parts with poor adhesion and fill the empty spaces with the mortar itself.
Wood-based supports, check and guarantee the stability of the support, if necessary reinforce it.
The surface of the support must be cement-based over 30 days old.
The surface of the support must be smooth, dry, free from dust, oils, plaster or other loose debris.
If the substrate has irregularities greater than 5 mm, it must be previously adjusted.
The surface of the support must not have a temperature below 5ºC and above 30ºC.
OBSERVATIONS
Consumption by area of ceramics:
S <400 cm2: 3,5 kg / m2;
400 2: 4,5 to 5,5 kg / m2;
S <900 cm2: greater than 6 kg / m2;
Ceramics with irregular or low relief backing: without estimate; minimum thickness: 3 mm; maximum working thickness: 8 mm.
In light pieces, the use of Diera CL EasyFlex White is recommended.
For ceramic pieces with a surface area greater than 900 cm2, and whenever the support is different from screed, concrete or plaster, double bonding must be carried out, that is, apply mortar on the support and on the back of the ceramic pieces at the time of their installation. application.
Whenever you apply ceramic tiles in areas of heavy traffic, regardless of the area of the piece, make double bonding.
RESTRICTIONS
Collage on sand paint / enamel paint, pools.
For swimming pools use Diera CL Piscinas.
For exterior bonding on façades over 6 meters in height use Diera CL Composto.
