Single-component adhesive cement with mixed binders, fiber reinforced, improved adhesion, extended open time and reduced slippage (C2, according to NP EN 12004-1:2017), with reduced dust emission.
Suitable for:
- Multi-support and multi-coating bonding indoors and outdoors.
- Bonding ceramic tiles indoors up to 60 x 60 cm, on screeds and plasters, on concrete, apply Aditek P primer.
- Bonding ceramics and natural stone (<0.8 cm thick) on facades for small and medium formats.
- Bonding ceramic tiles on small and medium-sized external floors, on screeds in small areas.
COLOR
White | Gray.
PACKAGING
20 kg bags (paper and high-density polyethylene, with valve, printed with time and date of filling).
SUPPORTS
Cementitious substrates: screed, plaster, concrete, apply Aditek P.
The support must be more than 30 days old, and be smooth, dry, free of dust, oils, plaster or other debris.
If the support has irregularities greater than 5 mm, it must be adjusted beforehand.
The temperature of the support cannot be lower than 5º C nor higher than 30º C.
OBSERVATIONS
Consumption by ceramic area:
S < 400 cm2: 3.5 kg/m2;
400 < S < 900 cm2: 4.5 to 5.5 kg/m2;
S <900 cm2: greater than 6 kg/m2;
Ceramics with an irregular or low-relief back: no estimate; minimum thickness: 3 mm; Maximum working thickness: 8 mm.
On light pieces, the use of Diera CL Neoflex White is recommended.
For ceramic pieces with a surface area greater than 900 cm2, and whenever the support is different from screed, concrete or plaster, double gluing must be carried out, that is, applying mortar to the support and on the back of the ceramic pieces when they are placed. application.
Whenever you apply ceramic pieces in high traffic areas, regardless of the area of the piece, double bond them.
RESTRICTIONS
Collage on sand paint and enamel paint.
For external gluing on facades greater than 6 meters in height, use Diera CL Easyflex.
Wooden base supports use Diera CL Compound after checking and ensuring the stability of the support, reinforcing it if necessary.
