Fibre-reinforced cementitious mortar for bonding and sealing in thermal insulation with quick-drying properties, developed for work in high-humidity atmospheric conditions.
Monocomponent, with mixed binders (GP CS IV Wc1, in accordance with NP EN 998-1:2017).
Indicated for bonding and leveling in thermal insulation with expanded polystyrene on new or rehabilitated surfaces.
COLOR
Gray.
PACKAGING
20 kg bags (paper).
SUPPORTS
The support (cellular concrete wall, reinforced concrete, ceramic brick, cement block or thermal block masonry wall) must be more than 28 days old and clean and dry. Humidity must not exceed 2.5%.
The support must not show active cracking.
The substrate moisture must be less than 5%.
In the presence of substrates with irregularities greater than 10 mm, it must be corrected in advance.
OBSERVATIONS
EPS board bonding: 3 to 5 kg/m2.
Application over EPS board (1st layer): 3 to 3.5 kg/m2.
Application over anti-alkaline mesh (2nd layer): 3 to 3.5 kg/m2.
Minimum thickness in glue: 3 mm; maximum thickness of glue work: 7 mm; Maximum point thickness in gluing: 6 mm; maximum thickness in the coating of the boards: 5 mm.
RESTRICTIONS
Do not apply on horizontal surfaces or with angles less than 45º.
