Monocomponent gluing and smoothing mortar with mixed binders with the addition of synthetic fibers and cellulose (GP CS IV W2, in accordance with NP EN 998-1:2017).
Indicated for bonding and sealing in thermal insulation with expanded and extruded polystyrene on new surfaces, such as:
- Building facades;
- Interior coatings.
PACKING
25 Kg bags (paper).
SURFACES
Cellular concrete wall, reinforced concrete, masonry wall made of ceramic brick, cement block or thermal block.
OBSERVATIONS
Minimum thickness in glue: 3 mm
Maximum thickness of gluing work: 7 mm
Maximum point thickness in glue: 10 mm
Maximum thickness in coating of the boards: 5 mm
EPS/XPS board bonding: 4 kg/m2
Bus over EPS/XPS board (1st layer): 2 to 2,5 kg/m2
Bus over anti-alkaline net (2nd layer): 2 to 2,5 kg/m2
RESTRICTIONS
Do not apply on horizontal surfaces or with angles less than 45º.
The support must not show active cracking. In the presence of substrates with irregularities greater than 10 mm, it must be corrected in advance.