Products Mortar joints Mortars Joints

Cementitious mortar for joints, class CG 2 WA according to EN 13888-1:2022, improved with reduced water absorption and high abrasion resistance.

Mortar manufactured in various colors (30), for the grout of ceramic pieces of any type and shape, for exterior, interior and areas with continuous or very high humidity and swimming pools. We are dealing with a cementitious base mortar, which can be damaged in contact with salt water and some products used in the maintenance of swimming pools.

Washable joint after complete drying of the cement.

To bridge joints from 1 mm to 10 mm wide.

Mortar with antifungal properties.

The ceramic surface must be clean and the joints dry, free from grease, paint and dust.

Use a protector on the absorbent ceramic or with irregular surface.

Grouting must be done 48 hours after bonding the ceramic pieces. Do not mix the mortar by hand as you may not obtain the intensity of the chosen colour. 

For more intense colours pay attention to possible efflorescences if the environment is too humid or if the surface is less than 28 days old.