Epoxy mortar for joints, class RG according to EN 13888 and adhesive mortar class R2 according to NP EN 12 004-1:2017.
Mortar manufactured in some colors for grouting ceramic pieces of any shape, for external and internal areas. It can be used in kitchens, bathrooms, saunas, beauty centers, swimming pools, laboratory benches, hospitals, etc.
To fill joints from 2 mm to 10 mm wide.
Mortar resistant to acids and salt water. Anti-stain, anti-mold and antibacterial. It ensures good resistance to aging, as well as easy cleaning.
COLOR
Beige | White | Gray.
PACKAGING
2.5 kg bucket.
SUPPORTS
Joints must be dry and free from oil, paint and dust.
The surface of the ceramic pieces must be clean before application begins.
Mortar is not an elastic product, therefore, the support must be fixed and not deformable, as well as not suffer from oscillations or vibrations.
OBSERVATIONS
Mix the two pre-dosed components in their entirety, in the bucket where provided until a homogeneous mixture is obtained. Use clean and dry tool. Low speed electric mixer is recommended.
The addition of any other product to the mixture is completely prohibited.
Always use rubber gloves as component B is irritating to the skin.
Start cleaning a few minutes after application. The passage of time greatly increases the difficulty of cleaning.
RESTRICTIONS
Do not apply when ceramic pieces have an absorbent surface.
At temperatures above 30ºC the usage time is very short.
For temperatures below 15ºC the drying time is very long and is not recommended.
