Self-levelling mortar based on special cements used for levelling interior surfaces up to 10 mm, later to covered with parquet, wooden floor or ceramic material.
Product to be used in new or rehabilitation works in areas with moderate traffic.
Bag of 25 Kg (paper).
Cementitious based surfaces (consult the Technical Department in situations of non-cementitious surfaces), should be clean, free of dust, grease, sufficiently consistent and without loose or disaggregated particles.
Apply one initial coat of Aditek P primer, and let it dry until a film is formed.
Consumption: 1,8 Kg/m2/mm.
Retraction: <1 mm/m.
Do not use on thickness greater than those recommended, neither on places with permanent humidity.
On surfaces with floor heating, it must be switched off with a minimum interval of 24 h before application.