Self-levelling mortar with high resistance, fluidity and fast drying, for levelling interior surfaces between 5 and 15 mm thick. Suitable for industrial floors and surfaces subject to high levels of wear.
Does not require a final coating.
COLOR
Grey.
PACKAGING
20 kg bag (paper).
SUPPORTS
Cement-based supports. For non-cement-based supports, consult the Technical Department.
The supports must be clean, free of dust, grease, paint and sufficiently consistent, with a minimum tensile strength of at least 1.5 MPa and free of loose and disintegrated particles.
In the event of renovation, the support must be prepared using a mechanical process (milling, diamond cutting or sanding).
The base must always be vacuumed to remove all dust or loose debris before applying the primer.
To reduce the risk of cracks appearing due to the base shrinking, the support must be at least 28 days old.
OBSERVATIONS
Apply Aditek P primer to the substrate in one coat (see technical data sheet) and allow to dry until a film forms. The drying time of the primer depends on atmospheric conditions and should never be less than 24 hours.
The mortar can be applied manually or pumped using specific pumping machines.
Consumption: 1.7 kg/m2/mm.
RESTRICTIONS
Do not apply in thicknesses greater than recommended.
Do not apply in areas with permanent humidity.
Do not apply in outdoor areas.
Do not apply to metal surfaces.
Do not apply directly to anhydrite.
