Use instructions for DieraGrés
SUPPORT
The support must be consistent, cleaned and dry. It's necessary to check if the support is plane using a 2 m ruler. It should exist differences of level over 5mm.
APPLICATION
Mix Diera Grés with 6 ? 6.5 litres of water per bag, manual or with electrical mixer until it gets into an homogeneous paste. Spread on the support in small sizes (maximum 2 m2), comb with the tooth side of the darby to normalize the thickness. Set the pieces joining them to guarantee a good material transfer.
ADVICES
Protect coatings and ceramic floors from dilatations and contractions with a good joints treatment. The application temperature should vary between 5 ºC and 30 ºC. Make always double fixing for pieces application.
OBSERVATIONS
The time to rest after mixing is 2 m, time to adjust 40 m, the paste has a period of time of 4 hours and 10mm of maximum thickness application.
These periods of time are made at 20 ºC and can rise at low temperatures or diminished at high temperatures.
CONSUMPTION 4 to 6 kg p/ m2.
PRESERVATION
12 months from the production date, in original closed package and away from humidity.
TECHNICAL DATA
Minimum thickness of 6 mm
Maximum thickness of work 6 mm
Unusual maximum thickness 6 mm
Application temperatures
- Air : + 5 ºC to 35 ºC
- Surface of application: + 5 ºC to 25 ºC
Time of floors use
- Workers with care: 2 days
- All traffic: 10 days
Rejoint 1 day after application
colour: White and grey
Consumption per ceramic area / size of darby's teeth
- S < 400 cm2 3,5 kg/ m2
- 400 =< S < 900 cm2 4,5 to 5,5 kg/ m2
- S >= 900 cm2 superior to 6 kg/ m2
Ceramic with irregular back side or in low relief. No estimate
The support must be consistent, cleaned and dry. It's necessary to check if the support is plane using a 2 m ruler. It should exist differences of level over 5mm.
APPLICATION
Mix Diera Grés with 6 ? 6.5 litres of water per bag, manual or with electrical mixer until it gets into an homogeneous paste. Spread on the support in small sizes (maximum 2 m2), comb with the tooth side of the darby to normalize the thickness. Set the pieces joining them to guarantee a good material transfer.
ADVICES
Protect coatings and ceramic floors from dilatations and contractions with a good joints treatment. The application temperature should vary between 5 ºC and 30 ºC. Make always double fixing for pieces application.
OBSERVATIONS
The time to rest after mixing is 2 m, time to adjust 40 m, the paste has a period of time of 4 hours and 10mm of maximum thickness application.
These periods of time are made at 20 ºC and can rise at low temperatures or diminished at high temperatures.
CONSUMPTION 4 to 6 kg p/ m2.
PRESERVATION
12 months from the production date, in original closed package and away from humidity.
TECHNICAL DATA
Minimum thickness of 6 mm
Maximum thickness of work 6 mm
Unusual maximum thickness 6 mm
Application temperatures
- Air : + 5 ºC to 35 ºC
- Surface of application: + 5 ºC to 25 ºC
Time of floors use
- Workers with care: 2 days
- All traffic: 10 days
Rejoint 1 day after application
colour: White and grey
Consumption per ceramic area / size of darby's teeth
- S < 400 cm2 3,5 kg/ m2
- 400 =< S < 900 cm2 4,5 to 5,5 kg/ m2
- S >= 900 cm2 superior to 6 kg/ m2
Ceramic with irregular back side or in low relief. No estimate