Single-component liquid waterproofing membrane for waterproofing surfaces, walls and floors, both indoors and outdoors, that are not subject to continuous immersion.
It is designed for laying ceramic and stone materials.
It is very easy to apply and, as it is fluid, adapts to any surface configuration.
Its properties include:
- Flexibility and elasticity;
- Good adhesion to the substrate;
- Permeability to water vapour;
COLOR
Yellow.
PACKAGING
7 and 20 kg buckets.
SUPPORTS
Plasterboard, plaster, cementitious render, concrete and plywood.
The substrates must be dry, free of particles, moss, algae and other adhesion inhibitors. Concrete and cement substrates must be properly cured and free from rising damp.
DILUTION
Ready-to-apply product. If necessary, it can be diluted with clean water up to a maximum of 5%.
YIELD
0.5 to 0.6 kg/m2/coat.
NUMBER OF COATS
It is recommended to apply 2 to 3 crossed coats, the thickness per layer must be less than 1 mm and the final thickness must be greater than 1 mm.
COMPONENTS
Single-component.
