Trevões Village
São João da Pesqueira
Located in São João da Pesqueira municipality, Viseu district, the Trevões village has approximately 21,55 km² of area and 540 habitants (2011) which encloses the Douro Wine Villages route.
This village has buildings classified as buildings of public interest and national monuments, due to its once political importance in the region, having been county seat between XII and XIX century, and is today an important tourist attraction in the Douro wine region, because of its beautiful landscape and its architecture passing through several different times and styles.
In 2001 was born the project of Douro Wine Villages, with the aim of recovering several Douro Wine villages, through the socio-economical revitalization, population fixation, rehabilitation of public places, stimulation of popular culture, and reinforcement of the Douro tourist promotion. After this project in 2007 was made the rehabilitation of Trevões Village, in an investment of 2,4 millions of Euros which covered the rehabilitation of approximately 40 façades and houses covering, resurfacing of roads and improvement of roadways.
During the façades rehabilitation process the Diera rehabilitation solutions were widely used, with cementitious coat reinforced with net with the final coating mortar DIERA RV FINO, and the use of the adhesion promoter ADITEK P and the micronized mortar DIERA TC ESTUQUE PLUS in order to give a lime-based smooth finish.
SOLUTIONS USED
Finishing mortar, sanded, with high resistance to water penetration and hardness, developed for the rehabilitation of hydraulic plaster of cimentitious base, old and new, who present random cracking originating in retraction of the mortars. Specific product for armed buses.
White micronized mortar for application in cementitious bases and lime based plaster substrates.
For application on walls and ceilings, outdoors. Gives smooth finishes and has excellent consumption (0,3 to 0,6 kg / m2 / mm) and low drying time (3 to 4 hours).
Available in bags of 15 Kg.
Primary designed to promote adhesion on critical substrates, extend the durability of the support / coating cohesion and increase adhesion when applying a construction glue or grout mortar.
Used like union bridge in cement bases, in supports with or without absorption, new or old surfaces, in the interior or exterior.