Use instructions for Adhesive Paste
APPLICATION
The adhesive paste Diera is very easy to apply, you only need to add 20 to 25% of water, mix well and then let it rest for 10 minutes. After this, extend on the surface with the darby or spoon with a thickness of 4 to 5mm, use the toothside of the darby. Set immediately the pieces on the mortar pressing with hands or use the rubber hammer. The correction of any ceramic piece must be done during the first 30 minutes after application. Do not cover the joints or make any other movement on the tiles during the first 2 hours after the application. The fixation is after 48h.
The adhesive paste Diera is very easy to apply, you only need to add 20 to 25% of water, mix well and then let it rest for 10 minutes. After this, extend on the surface with the darby or spoon with a thickness of 4 to 5mm, use the toothside of the darby. Set immediately the pieces on the mortar pressing with hands or use the rubber hammer. The correction of any ceramic piece must be done during the first 30 minutes after application. Do not cover the joints or make any other movement on the tiles during the first 2 hours after the application. The fixation is after 48h.